Max-Seal 6006 Anti-Mildew Silicone Sealant

FOB Reference Price:Get Latest Price
US $0.5-2 / Piece | 4800 Piece/Pieces 200ctns (Min. Order)
Supply Ability:
2000 Carton/Cartons per Day 60 tons/day
Shunde, Guangzhou, Shenzhen
Report Suspicious Activity
Quick Details
Other Names:
silicone sealant
Place of Origin:
Guangdong, China (Mainland)
Other Adhesives
Main Raw Material:
Brand Name:
Max-seal 6006
Model Number:
MS 6006
white, clear, black, gray
Packaging & Delivery
Packaging Details
300ml, 280ml/cartridge, 24 cartridges/carton
Delivery Time
25 days within quantity of 3 containers


The product is mildewproof (fungicide) silicone sealant suitable used for toiltet, kitchen, window, door or other decoration.


1) Max-seal 6006 Mildewproof Silicone Sealant is a Neutral cure, room temperature vulcanized sealant, has excellent adhesion to most porous surfaces with 
mildew proof (fungicide) ability, such as concrete, stone, brick, marble, cement and
ceramics etc materials.

2) It adheres to clean glass, many plastics, aluminum and galvanized steel.


3) This product is suitable used for the toilet, kitchen, window, door, aluminium composed sheet and other building decoration as waterproof and weatherproof sealant.

3) Condition request: sealant should be in temperature of 5 - 40°C

4) Its used under the relative humidity 40% - 80%

Common characteristic before solidify:
1) Appearance: no granule paste
2) Density: 1.38 (20 Celsius degree)
3) Skin dry time: 40 minutes (RH 50%, 25 Celsius degree)
4) Solidification time: 4 - 8 days (RH 50%, 25 Celsius degree)
5) Drooping degree: 0mm

After solidify
1) Rigidity a type sclerometer: 23
2) Elongate ratio: 100%
3) Elongate intension: 0.8Mpa
4) The data just is for consulting, but not promising

Clean process:
1) All the material should be clean out, remove dust / dirt or other feculence
2) The scour must be the solvent which was tested, if use IRA / MEK or XYLENE
which didn't demonstrate, the latter's toxicity is stronger and the other two
are better fitting
3) Elementary clean method: First, use the wettish and undepilatory pure-cotton
cloth to clean another clean cloth to clean the feculence before the solvent
volatilization, it should not dry the solvent naturally, lest should feculence
newly on the material
4) For small and deep interface, it needs to clean at full tilt
5) The material that was cleaned out should do with using lacquer, otherwise it
should be cleaned out again. If cleaned surface exposed or in the feculence,
it should be cleaned again
6) It should be changed the white cloth, which was contaminative, and it should
be raved about the impregnant from the container onto the clean cloth and it
should not put the cloth into container, otherwise the clean impregnant will
be contaminative, it will affect the result
7) It due to all the cleanout liquid are the tinder and have toxicity, it should
have good airiness condition / strictly prohibit fireworks when using them, and
adopt necessary safe system

Sealant construction process:
Common request:
1) Silicone sealant should be used in 5-40 Celsius degree, this can bring the
better effect
2) It can stick on temporary protect adhesive tape when it's necessary, if it use
the bottom-gelatinise, it must before using the sealant
3) Using the sealant should be continual, making the sealant form the columned
pile out, sealant should pile out equally, make sure it full of sealant on the
place where it need, avoid making the bubble
4) It must be decorate after using sealant, the common method is using the tools
to make overflow sealant in the direction of interface, and then beauty the
interface, make sure the interface contact equally, and then uncover all the
temporary protect adhesive tape
5) After 48 hours of using the sealant, the interface can't have the big
displacement, otherwise it will effect the result

Executive standard:
GB/T 14683-1993

300ml, 280ml/cartridge, 24 cartridges/carton