Detailed Product Description

Neutral Weatherproof Silicone Sealant:

2. The product has the following unique features:
1). Easy to be used, can be squeezed out by common sealant gun.
2).Neutral cure, can be applied to anodized or membrane plated aluminum materials,
meanwhile, there are not untoward reaction and corrosion for most of building
materials.
3). Excellent adhesion, can form a strong sealing layer with most of building material
when curing and isn't necessary to use primer.
4). Excellent weatherproofing capability, the sealant can't be affected by sunshine,
rain, snow, ozone and extreme high or low temperature.
3. Basic Uses:
Max-seal 8000 Weatherproof Silicone Sealant is suitable to be used in retractable
slot, no-structural curtain-wall slot and the slots between stone materials or
metal plates as calking sealant.
In most cases, the product can form a durable and flexible waterproof layer with
most building materials such as tile, granite, stone, brick, wood, steel and anodized
aluminum etc. Meanwhile, it also can be used as install or calking for the
joints of galvanized steel plate galvanized aluminum plate, aluminum sheet and
plastic plate etc.
4. Application Limits:
Max-seal 8000 Weatherproof Silicone Sealant cannot be applied to following situation:
1). Materials that can penetrate oil, plasticizer or solvent. These materials include
oil-soaked wood, oil based steel board slot, certain un-sulfurized or partly
sulfurized rubber pad, and adhesive tape etc.
2). Sealed location. (Silicone needs moisture in the air for solidification).
3). Soaking in water continuously.
4). The temperature of material surface is higher than 40 Celsius degree or lower
than 5 Celsius degree.
5). Frosted or damp surface.
5. Material Speciality:
Max-seal 8000 Weatherproof Silicone Sealant is a stiff paste material of single-component
with stable chemical stability. The product material is still uniformity
in stickiness and can be extruded easily under special conditions with the temperature
between -25 to 50 Celsius degree. After solidification, the product can
maintain no hardened under the temperature of -50 Celsius degree, and no softened
under the temperature of +150 Celsius degree. It is not easy to be embrittled,
cracked or torn.

The product is suitable to be used in temperature of 5--40 Celsius degree, and under
the relative humidity between 40% and 80%. Too low temperature will reduce conglutination,
because the sealant's surface adhesion wetting reduce, and it can
became frost ice on the low temperature's material, it effects the sealant's conglutination.
So, the standard using temperature is above 5 Celsius degree. It has
blight for the sealant in high temperature. As a result of high temperature,
the sealant will be drooping and expedite solidify time` reduce using and repair
time, at the same time, it will bring air bubble. If too low relative humidity
could make the solidify speed change slow, or if too high relative humidity could
form congregation on surface of material, it affects conglutination between the
sealant and material.

Common characteristic:
1) Appearance: no granule paste
2) Density (20 degree): 1.38
3) Skin dry time (RH 50%, 25 degree): 40 minutes
4) Solidification time (RH 50%, 25 degree): 4 - 8 days
5) Drooping degree: 0Mm
6) Rigidity (A type)" 23
7) Elongate ratio: no less 100%
8) Elongate intension: 0.8Mpa
9) The data just is for consulting, but not promising

Packing:
305ml/cartridge
24 cartridges/ctn